|
Supply
Opening
Left, Right, Front, Back and Top Combinations. All supply openings are
painted black to block the view into the unit and when one unit is used
for two rooms, a sight baffle is placed between the two grilles.
Supply
Grille
Aluminum construction minimizes future maintenance and eliminates oxidation
that can be caused from condensationÑ Single or Double Deflection with
or without an opposed blade damper
Supply/Return
Risers
Provided to meet the requirements of the jobsite. Custom lengths can
be provided to meet the exact floor to floor dimension of the project.
Risers are factory installed and piped to ball valves within the cabinet.
Riser
Cover
Galvanized steel protective cover is standard to avoid damage during
shipping, handling and installation
Ball
Valves
Shut off valves with hose bib (GHT) connection
Fan/Motor
Assembly
Plug-in type; easily removed through the return air opening Insulation
High density with thermal and acoustical properties
Cabinet
The galvanized monocoque construction permits the direct application
of plaster or drywall
Refrigeration
Chassis
Removable-floating design with insulated compressor compartment and
vibration isolation
Water
Hoses
Connects chassis to the supply and return water piping. Isolates compressor
sound from the building piping system.
Inner
Service Panel
Removable for access to unit control wiring and internal piping
Filter
Throwaway or permanent
Drain
Pan
Covers the entire unit bottom Thermostat Low voltage; plug-in or remote
mounted; manual or automatic changeover; electro-mechanical or electronic
Acoustical
Panel
Standard and flush mounted design with hinged door to allow filter removal
without the use of tools
Return
Air Grille
Aluminum with standard or removable core capabilities
Unit
Tagging
Each unit is individually boxed and tagged with factory and customer
supplied information. Whalen units can be tagged with specific room
numbers, riser numbers or any special requirement of the project.
|
